How to Measure Yourself for a Custom Wedding Dress
Share
How to Measure Yourself for a Custom Wedding Dress
Accurate measurements give a dressmaker a useful starting point for creating a custom wedding dress. Taking them at home is manageable when you use a soft measuring tape, follow the same steps each time, and write down each number clearly. A friend can help you keep the tape level and check measurements that are hard to reach on your own.
Before you begin, check the instructions for the dress or measurement chart you plan to use. Different makers may ask for different measurements, or define them in different ways. Vicumo’s size chart can help you understand the measurements requested, while the custom size page offers information about ordering for your measurements.
Get ready to measure
Wear the undergarments you expect to wear with your dress, or a close equivalent. If you plan to wear shaping garments, include them; if not, measure without them. Wear shoes with a heel height similar to the pair you expect to wear on the day, especially when measuring dress length. Keep your posture natural, stand straight without holding your breath, and let your arms rest comfortably at your sides.
Use a flexible measuring tape that lies flat against your body. It should be snug enough to stay in place, but not tight or digging into your skin. Ask a helper to check that the tape is level around your body. Measure in inches or centimeters according to the chart, and use the same unit throughout. Take each measurement twice. If the numbers differ, measure again rather than guessing.
Measurements to take
Bust
Wrap the tape around the fullest part of your bust, keeping it parallel to the floor across your back. Let your arms relax while your helper checks the tape. Don’t pull the tape tight or press your bust down. Record the measurement while standing in a natural position. If the size chart requests an underbust measurement, take that separately around the body directly beneath the bust.
Waist
Find your natural waist by bending gently to one side. The crease where your body bends is a helpful guide. Stand upright again and wrap the tape around this area, keeping it comfortably close without compressing your body. Avoid measuring at the waistband of your trousers unless that is where the chart specifically says to measure.
Hips
Stand with your feet together and measure around the fullest part of your hips and seat. Check that the tape is level all the way around and does not slip upward at the back. This measurement is about the fullest area, not necessarily the spot where you usually wear a skirt or trousers.
Shoulder and upper-body measurements
Some dresses require shoulder width, armhole, or sleeve measurements. Follow the chart’s directions closely, as the starting and ending points can vary. For shoulder width, a helper can measure across your back from the edge of one shoulder to the other. For sleeves, keep your arm relaxed and slightly bent if the chart asks for a bent-arm measurement. Don’t try to estimate measurements from a garment unless the maker specifically requests that method.
Dress length
Length instructions are not universal. A chart might ask for a measurement from the hollow at the base of your neck to the floor, or it may give another starting point. Follow the exact route and endpoint shown in the instructions. Wear the shoes you plan to pair with the gown, stand straight, and have your helper measure down to the floor. If the instructions ask for a floor-length measurement, don’t add extra length yourself.
Tips for a more reliable fit
Use a helper for measurements around your back, shoulders, and length. It is harder to keep the tape level when measuring alone.
Keep the tape flat against your body. Twists, gaps, and sloping lines can change the reading.
Don’t add or subtract inches to try to make a measurement match a preferred size. Record your body measurements as they are and follow the maker’s ordering guidance.
Write down each measurement immediately, label it clearly, and note whether you used inches or centimeters.
Ask someone to check your measurements if you are unsure about a starting point or how the tape should sit.
A made to measure wedding dress is based on the information requested by its maker, so carefully following the directions matters more than taking extra measurements that aren’t requested. If you are shopping for a plus size wedding dress, use the same careful process: measure comfortably, avoid pulling the tape tight, and don’t alter your numbers to fit a standard size label. The right measurements should describe your body, not an imagined version of it.
Check your numbers before ordering
Compare your notes with the size chart or order instructions before submitting them. Make sure you have not mixed units and that the bust, waist, and hip numbers are matched to the correct labels. If a measurement seems unexpectedly different from another, take it again with the same posture and clothing. Don’t assume that all dresses use the same measurement list or that a familiar clothing size can replace body measurements.
Keep a copy of your measurements and the date you took them. If you take them again later, use the same undergarments, shoes, and method so you can compare the results fairly. If the instructions are unclear or you need help with the custom-size process, visit Vicumo’s contact page for a way to get in touch.
With a calm setup and a careful second check, measuring at home can make ordering feel more straightforward. Browse Vicumo’s custom wedding dress collection and email care@vicumo.com with any questions.